-SUBDIRS = src
-man_MANS = fping.8
-EXTRA_DIST = $(man_MANS) autogen.sh
+SUBDIRS = doc src
DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(srcdir)/config.h.in \
$(top_srcdir)/configure COPYING ChangeLog INSTALL acconfig.h \
- config.guess config.sub depcomp install-sh missing \
- mkinstalldirs
+ config.guess config.sub install-sh missing mkinstalldirs
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
+depcomp =
+am__depfiles_maybe =
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
install-pdf-recursive install-ps-recursive install-recursive \
installcheck-recursive installdirs-recursive pdf-recursive \
ps-recursive uninstall-recursive
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-man8dir = $(mandir)/man8
-am__installdirs = "$(DESTDIR)$(man8dir)"
-NROFF = nroff
-MANS = $(man_MANS)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
-CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
-DEPDIR = @DEPDIR@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
-SUBDIRS = src
-man_MANS = fping.8
-EXTRA_DIST = $(man_MANS) autogen.sh
+SUBDIRS = doc src
all: config.h
$(MAKE) $(AM_MAKEFLAGS) all-recursive
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
- echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
- $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
+ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign --ignore-deps'; \
+ $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign --ignore-deps \
&& exit 0; \
exit 1;; \
esac; \
done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign --ignore-deps Makefile'; \
$(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --foreign Makefile
+ $(AUTOMAKE) --foreign --ignore-deps Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
distclean-hdr:
-rm -f config.h stamp-h1
-install-man8: $(man_MANS)
- @$(NORMAL_INSTALL)
- test -z "$(man8dir)" || $(MKDIR_P) "$(DESTDIR)$(man8dir)"
- @list=''; test -n "$(man8dir)" || exit 0; \
- { for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.8[a-z]*$$/p'; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
- done; }
-
-uninstall-man8:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man8dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.8[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- test -z "$$files" || { \
- echo " ( cd '$(DESTDIR)$(man8dir)' && rm -f" $$files ")"; \
- cd "$(DESTDIR)$(man8dir)" && rm -f $$files; }
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
- @list='$(MANS)'; if test -n "$$list"; then \
- list=`for p in $$list; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
- if test -n "$$list" && \
- grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
- echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
- grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
- echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
- echo " typically \`make maintainer-clean' will remove them" >&2; \
- exit 1; \
- else :; fi; \
- else :; fi
$(am__remove_distdir)
test -d "$(distdir)" || mkdir "$(distdir)"
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
exit 1; } >&2
check-am: all-am
check: check-recursive
-all-am: Makefile $(MANS) config.h
+all-am: Makefile config.h
installdirs: installdirs-recursive
installdirs-am:
- for dir in "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
info-am:
-install-data-am: install-man
+install-data-am:
install-dvi: install-dvi-recursive
install-info-am:
-install-man: install-man8
+install-man:
install-pdf: install-pdf-recursive
ps-am:
-uninstall-am: uninstall-man
-
-uninstall-man: uninstall-man8
+uninstall-am:
.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \
ctags-recursive install-am install-strip tags-recursive
html-am info info-am install install-am install-data \
install-data-am install-dvi install-dvi-am install-exec \
install-exec-am install-html install-html-am install-info \
- install-info-am install-man install-man8 install-pdf \
- install-pdf-am install-ps install-ps-am install-strip \
- installcheck installcheck-am installdirs installdirs-am \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-generic pdf pdf-am ps ps-am tags tags-recursive \
- uninstall uninstall-am uninstall-man uninstall-man8
+ install-info-am install-man install-pdf install-pdf-am \
+ install-ps install-ps-am install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am
# Tell versions [3.59,3.63) of GNU make to not export all variables.
Usually this means the macro was only invoked conditionally.]])
fi])])
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 10
-
-# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
-# written in clear, in which case automake, when reading aclocal.m4,
-# will think it sees a *use*, and therefore will trigger all it's
-# C support machinery. Also note that it means that autoscan, seeing
-# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
-
-
-# _AM_DEPENDENCIES(NAME)
-# ----------------------
-# See how the compiler implements dependency checking.
-# NAME is "CC", "CXX", "GCJ", or "OBJC".
-# We try a few techniques and use that to set a single cache variable.
-#
-# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
-# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
-# dependency, and given that the user is not expected to run this macro,
-# just rely on AC_PROG_CC.
-AC_DEFUN([_AM_DEPENDENCIES],
-[AC_REQUIRE([AM_SET_DEPDIR])dnl
-AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
-AC_REQUIRE([AM_MAKE_INCLUDE])dnl
-AC_REQUIRE([AM_DEP_TRACK])dnl
-
-ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
- [$1], CXX, [depcc="$CXX" am_compiler_list=],
- [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
- [$1], UPC, [depcc="$UPC" am_compiler_list=],
- [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
- [depcc="$$1" am_compiler_list=])
-
-AC_CACHE_CHECK([dependency style of $depcc],
- [am_cv_$1_dependencies_compiler_type],
-[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
- # We make a subdir and do the tests there. Otherwise we can end up
- # making bogus files that we don't know about and never remove. For
- # instance it was reported that on HP-UX the gcc test will end up
- # making a dummy file named `D' -- because `-MD' means `put the output
- # in D'.
- mkdir conftest.dir
- # Copy depcomp to subdir because otherwise we won't find it if we're
- # using a relative directory.
- cp "$am_depcomp" conftest.dir
- cd conftest.dir
- # We will build objects and dependencies in a subdirectory because
- # it helps to detect inapplicable dependency modes. For instance
- # both Tru64's cc and ICC support -MD to output dependencies as a
- # side effect of compilation, but ICC will put the dependencies in
- # the current directory while Tru64 will put them in the object
- # directory.
- mkdir sub
-
- am_cv_$1_dependencies_compiler_type=none
- if test "$am_compiler_list" = ""; then
- am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
- fi
- am__universal=false
- m4_case([$1], [CC],
- [case " $depcc " in #(
- *\ -arch\ *\ -arch\ *) am__universal=true ;;
- esac],
- [CXX],
- [case " $depcc " in #(
- *\ -arch\ *\ -arch\ *) am__universal=true ;;
- esac])
-
- for depmode in $am_compiler_list; do
- # Setup a source with many dependencies, because some compilers
- # like to wrap large dependency lists on column 80 (with \), and
- # we should not choose a depcomp mode which is confused by this.
- #
- # We need to recreate these files for each test, as the compiler may
- # overwrite some of them when testing with obscure command lines.
- # This happens at least with the AIX C compiler.
- : > sub/conftest.c
- for i in 1 2 3 4 5 6; do
- echo '#include "conftst'$i'.h"' >> sub/conftest.c
- # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
- # Solaris 8's {/usr,}/bin/sh.
- touch sub/conftst$i.h
- done
- echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
- # We check with `-c' and `-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle `-M -o', and we need to detect this. Also, some Intel
- # versions had trouble with output in subdirs
- am__obj=sub/conftest.${OBJEXT-o}
- am__minus_obj="-o $am__obj"
- case $depmode in
- gcc)
- # This depmode causes a compiler race in universal mode.
- test "$am__universal" = false || continue
- ;;
- nosideeffect)
- # after this tag, mechanisms are not by side-effect, so they'll
- # only be used when explicitly requested
- if test "x$enable_dependency_tracking" = xyes; then
- continue
- else
- break
- fi
- ;;
- msvisualcpp | msvcmsys)
- # This compiler won't grok `-c -o', but also, the minuso test has
- # not run yet. These depmodes are late enough in the game, and
- # so weak that their functioning should not be impacted.
- am__obj=conftest.${OBJEXT-o}
- am__minus_obj=
- ;;
- none) break ;;
- esac
- if depmode=$depmode \
- source=sub/conftest.c object=$am__obj \
- depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
- $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
- >/dev/null 2>conftest.err &&
- grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
- grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
- # icc doesn't choke on unknown options, it will just issue warnings
- # or remarks (even with -Werror). So we grep stderr for any message
- # that says an option was ignored or not supported.
- # When given -MP, icc 7.0 and 7.1 complain thusly:
- # icc: Command line warning: ignoring option '-M'; no argument required
- # The diagnosis changed in icc 8.0:
- # icc: Command line remark: option '-MP' not supported
- if (grep 'ignoring option' conftest.err ||
- grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
- am_cv_$1_dependencies_compiler_type=$depmode
- break
- fi
- fi
- done
-
- cd ..
- rm -rf conftest.dir
-else
- am_cv_$1_dependencies_compiler_type=none
-fi
-])
-AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
-AM_CONDITIONAL([am__fastdep$1], [
- test "x$enable_dependency_tracking" != xno \
- && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
-])
-
-
-# AM_SET_DEPDIR
-# -------------
-# Choose a directory name for dependency files.
-# This macro is AC_REQUIREd in _AM_DEPENDENCIES
-AC_DEFUN([AM_SET_DEPDIR],
-[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
-])
-
-
-# AM_DEP_TRACK
-# ------------
-AC_DEFUN([AM_DEP_TRACK],
-[AC_ARG_ENABLE(dependency-tracking,
-[ --disable-dependency-tracking speeds up one-time build
- --enable-dependency-tracking do not reject slow dependency extractors])
-if test "x$enable_dependency_tracking" != xno; then
- am_depcomp="$ac_aux_dir/depcomp"
- AMDEPBACKSLASH='\'
-fi
-AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
-AC_SUBST([AMDEPBACKSLASH])dnl
-_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
-])
-
-# Generate code to set up dependency tracking. -*- Autoconf -*-
-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-#serial 5
-
-# _AM_OUTPUT_DEPENDENCY_COMMANDS
-# ------------------------------
-AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
-[{
- # Autoconf 2.62 quotes --file arguments for eval, but not when files
- # are listed without --file. Let's play safe and only enable the eval
- # if we detect the quoting.
- case $CONFIG_FILES in
- *\'*) eval set x "$CONFIG_FILES" ;;
- *) set x $CONFIG_FILES ;;
- esac
- shift
- for mf
- do
- # Strip MF so we end up with the name of the file.
- mf=`echo "$mf" | sed -e 's/:.*$//'`
- # Check whether this is an Automake generated Makefile or not.
- # We used to match only the files named `Makefile.in', but
- # some people rename them; so instead we look at the file content.
- # Grep'ing the first line is not enough: some people post-process
- # each Makefile.in and add a new line on top of each file to say so.
- # Grep'ing the whole file is not good either: AIX grep has a line
- # limit of 2048, but all sed's we know have understand at least 4000.
- if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
- dirpart=`AS_DIRNAME("$mf")`
- else
- continue
- fi
- # Extract the definition of DEPDIR, am__include, and am__quote
- # from the Makefile without running `make'.
- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
- test -z "$DEPDIR" && continue
- am__include=`sed -n 's/^am__include = //p' < "$mf"`
- test -z "am__include" && continue
- am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
- # When using ansi2knr, U may be empty or an underscore; expand it
- U=`sed -n 's/^U = //p' < "$mf"`
- # Find all dependency output files, they are included files with
- # $(DEPDIR) in their names. We invoke sed twice because it is the
- # simplest approach to changing $(DEPDIR) to its actual value in the
- # expansion.
- for file in `sed -n "
- s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
- # Make sure the directory exists.
- test -f "$dirpart/$file" && continue
- fdir=`AS_DIRNAME(["$file"])`
- AS_MKDIR_P([$dirpart/$fdir])
- # echo "creating $dirpart/$file"
- echo '# dummy' > "$dirpart/$file"
- done
- done
-}
-])# _AM_OUTPUT_DEPENDENCY_COMMANDS
-
-
-# AM_OUTPUT_DEPENDENCY_COMMANDS
-# -----------------------------
-# This macro should only be invoked once -- use via AC_REQUIRE.
-#
-# This code is only required when automatic dependency tracking
-# is enabled. FIXME. This creates each `.P' file that we will
-# need in order to bootstrap the dependency handling code.
-AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
-[AC_CONFIG_COMMANDS([depfiles],
- [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
- [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
-])
-
# Do all the work for Automake. -*- Autoconf -*-
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])
-# Check to see how 'make' treats includes. -*- Autoconf -*-
-
-# Copyright (C) 2001, 2002, 2003, 2005, 2009 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 4
-
-# AM_MAKE_INCLUDE()
-# -----------------
-# Check to see how make treats includes.
-AC_DEFUN([AM_MAKE_INCLUDE],
-[am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
- @echo this is the am__doit target
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-AC_MSG_CHECKING([for style of include used by $am_make])
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# Ignore all kinds of additional output from `make'.
-case `$am_make -s -f confmf 2> /dev/null` in #(
-*the\ am__doit\ target*)
- am__include=include
- am__quote=
- _am_result=GNU
- ;;
-esac
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
- echo '.include "confinc"' > confmf
- case `$am_make -s -f confmf 2> /dev/null` in #(
- *the\ am__doit\ target*)
- am__include=.include
- am__quote="\""
- _am_result=BSD
- ;;
- esac
-fi
-AC_SUBST([am__include])
-AC_SUBST([am__quote])
-AC_MSG_RESULT([$_am_result])
-rm -f confinc confmf
-])
-
# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008
+++ /dev/null
-#!/bin/sh
-PATH="/usr/pack/automake-1.11-to/amd64-linux-debian3.1/:/usr/pack/automake-1.11-to/amd64-linux-ubuntu8.04/bin:$PATH"
-export PATH
-autoreconf --force --install --verbose
EGREP
GREP
CPP
-am__fastdepCC_FALSE
-am__fastdepCC_TRUE
-CCDEPMODE
-AMDEPBACKSLASH
-AMDEP_FALSE
-AMDEP_TRUE
-am__quote
-am__include
-DEPDIR
OBJEXT
EXEEXT
ac_ct_CC
ac_user_opts='
enable_option_checking
enable_maintainer_mode
-enable_dependency_tracking
'
ac_precious_vars='build_alias
host_alias
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer
- --disable-dependency-tracking speeds up one-time build
- --enable-dependency-tracking do not reject slow dependency extractors
Some influential environment variables:
CC C compiler command
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
-DEPDIR="${am__leading_dot}deps"
-
-ac_config_commands="$ac_config_commands depfiles"
-
-
-am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
- @echo this is the am__doit target
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
-$as_echo_n "checking for style of include used by $am_make... " >&6; }
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# Ignore all kinds of additional output from `make'.
-case `$am_make -s -f confmf 2> /dev/null` in #(
-*the\ am__doit\ target*)
- am__include=include
- am__quote=
- _am_result=GNU
- ;;
-esac
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
- echo '.include "confinc"' > confmf
- case `$am_make -s -f confmf 2> /dev/null` in #(
- *the\ am__doit\ target*)
- am__include=.include
- am__quote="\""
- _am_result=BSD
- ;;
- esac
-fi
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
-$as_echo "$_am_result" >&6; }
-rm -f confinc confmf
-
-# Check whether --enable-dependency-tracking was given.
-if test "${enable_dependency_tracking+set}" = set; then :
- enableval=$enable_dependency_tracking;
-fi
-
-if test "x$enable_dependency_tracking" != xno; then
- am_depcomp="$ac_aux_dir/depcomp"
- AMDEPBACKSLASH='\'
-fi
- if test "x$enable_dependency_tracking" != xno; then
- AMDEP_TRUE=
- AMDEP_FALSE='#'
-else
- AMDEP_TRUE='#'
- AMDEP_FALSE=
-fi
-
-
-
-depcc="$CC" am_compiler_list=
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
-$as_echo_n "checking dependency style of $depcc... " >&6; }
-if ${am_cv_CC_dependencies_compiler_type+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
- # We make a subdir and do the tests there. Otherwise we can end up
- # making bogus files that we don't know about and never remove. For
- # instance it was reported that on HP-UX the gcc test will end up
- # making a dummy file named `D' -- because `-MD' means `put the output
- # in D'.
- mkdir conftest.dir
- # Copy depcomp to subdir because otherwise we won't find it if we're
- # using a relative directory.
- cp "$am_depcomp" conftest.dir
- cd conftest.dir
- # We will build objects and dependencies in a subdirectory because
- # it helps to detect inapplicable dependency modes. For instance
- # both Tru64's cc and ICC support -MD to output dependencies as a
- # side effect of compilation, but ICC will put the dependencies in
- # the current directory while Tru64 will put them in the object
- # directory.
- mkdir sub
-
- am_cv_CC_dependencies_compiler_type=none
- if test "$am_compiler_list" = ""; then
- am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
- fi
- am__universal=false
- case " $depcc " in #(
- *\ -arch\ *\ -arch\ *) am__universal=true ;;
- esac
-
- for depmode in $am_compiler_list; do
- # Setup a source with many dependencies, because some compilers
- # like to wrap large dependency lists on column 80 (with \), and
- # we should not choose a depcomp mode which is confused by this.
- #
- # We need to recreate these files for each test, as the compiler may
- # overwrite some of them when testing with obscure command lines.
- # This happens at least with the AIX C compiler.
- : > sub/conftest.c
- for i in 1 2 3 4 5 6; do
- echo '#include "conftst'$i'.h"' >> sub/conftest.c
- # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
- # Solaris 8's {/usr,}/bin/sh.
- touch sub/conftst$i.h
- done
- echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
- # We check with `-c' and `-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle `-M -o', and we need to detect this. Also, some Intel
- # versions had trouble with output in subdirs
- am__obj=sub/conftest.${OBJEXT-o}
- am__minus_obj="-o $am__obj"
- case $depmode in
- gcc)
- # This depmode causes a compiler race in universal mode.
- test "$am__universal" = false || continue
- ;;
- nosideeffect)
- # after this tag, mechanisms are not by side-effect, so they'll
- # only be used when explicitly requested
- if test "x$enable_dependency_tracking" = xyes; then
- continue
- else
- break
- fi
- ;;
- msvisualcpp | msvcmsys)
- # This compiler won't grok `-c -o', but also, the minuso test has
- # not run yet. These depmodes are late enough in the game, and
- # so weak that their functioning should not be impacted.
- am__obj=conftest.${OBJEXT-o}
- am__minus_obj=
- ;;
- none) break ;;
- esac
- if depmode=$depmode \
- source=sub/conftest.c object=$am__obj \
- depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
- $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
- >/dev/null 2>conftest.err &&
- grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
- grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
- # icc doesn't choke on unknown options, it will just issue warnings
- # or remarks (even with -Werror). So we grep stderr for any message
- # that says an option was ignored or not supported.
- # When given -MP, icc 7.0 and 7.1 complain thusly:
- # icc: Command line warning: ignoring option '-M'; no argument required
- # The diagnosis changed in icc 8.0:
- # icc: Command line remark: option '-MP' not supported
- if (grep 'ignoring option' conftest.err ||
- grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
- am_cv_CC_dependencies_compiler_type=$depmode
- break
- fi
- fi
- done
-
- cd ..
- rm -rf conftest.dir
-else
- am_cv_CC_dependencies_compiler_type=none
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
-$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
-CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
-
- if
- test "x$enable_dependency_tracking" != xno \
- && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
- am__fastdepCC_TRUE=
- am__fastdepCC_FALSE='#'
-else
- am__fastdepCC_TRUE='#'
- am__fastdepCC_FALSE=
-fi
-
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
done
-ac_config_files="$ac_config_files Makefile src/Makefile"
+ac_config_files="$ac_config_files Makefile doc/Makefile src/Makefile"
cat >confcache <<\_ACEOF
as_fn_error $? "conditional \"MAINTAINER_MODE\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
fi
-if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
- as_fn_error $? "conditional \"AMDEP\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
- as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
: "${CONFIG_STATUS=./config.status}"
ac_write_fail=0
# Files that config.status was made for.
config_files="$ac_config_files"
config_headers="$ac_config_headers"
-config_commands="$ac_config_commands"
_ACEOF
Configuration headers:
$config_headers
-Configuration commands:
-$config_commands
-
Report bugs to the package provider."
_ACEOF
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-#
-# INIT-COMMANDS
-#
-AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
-
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
do
case $ac_config_target in
"config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
- "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
"Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+ "doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;;
"src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
*) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
if $ac_need_defaults; then
test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
- test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
fi
# Have a temporary directory for convenience. Make it in the build tree
fi # test -n "$CONFIG_HEADERS"
-eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS"
+eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS "
shift
for ac_tag
do
s/.*/./; q'`/stamp-h$_am_stamp_count
;;
- :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
-$as_echo "$as_me: executing $ac_file commands" >&6;}
- ;;
- esac
-
- case $ac_file$ac_mode in
- "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
- # Autoconf 2.62 quotes --file arguments for eval, but not when files
- # are listed without --file. Let's play safe and only enable the eval
- # if we detect the quoting.
- case $CONFIG_FILES in
- *\'*) eval set x "$CONFIG_FILES" ;;
- *) set x $CONFIG_FILES ;;
esac
- shift
- for mf
- do
- # Strip MF so we end up with the name of the file.
- mf=`echo "$mf" | sed -e 's/:.*$//'`
- # Check whether this is an Automake generated Makefile or not.
- # We used to match only the files named `Makefile.in', but
- # some people rename them; so instead we look at the file content.
- # Grep'ing the first line is not enough: some people post-process
- # each Makefile.in and add a new line on top of each file to say so.
- # Grep'ing the whole file is not good either: AIX grep has a line
- # limit of 2048, but all sed's we know have understand at least 4000.
- if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
- dirpart=`$as_dirname -- "$mf" ||
-$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$mf" : 'X\(//\)[^/]' \| \
- X"$mf" : 'X\(//\)$' \| \
- X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$mf" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- else
- continue
- fi
- # Extract the definition of DEPDIR, am__include, and am__quote
- # from the Makefile without running `make'.
- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
- test -z "$DEPDIR" && continue
- am__include=`sed -n 's/^am__include = //p' < "$mf"`
- test -z "am__include" && continue
- am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
- # When using ansi2knr, U may be empty or an underscore; expand it
- U=`sed -n 's/^U = //p' < "$mf"`
- # Find all dependency output files, they are included files with
- # $(DEPDIR) in their names. We invoke sed twice because it is the
- # simplest approach to changing $(DEPDIR) to its actual value in the
- # expansion.
- for file in `sed -n "
- s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
- # Make sure the directory exists.
- test -f "$dirpart/$file" && continue
- fdir=`$as_dirname -- "$file" ||
-$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$file" : 'X\(//\)[^/]' \| \
- X"$file" : 'X\(//\)$' \| \
- X"$file" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- as_dir=$dirpart/$fdir; as_fn_mkdir_p
- # echo "creating $dirpart/$file"
- echo '# dummy' > "$dirpart/$file"
- done
- done
-}
- ;;
- esac
done # for ac_tag
AC_INIT([fping],[3.0])
AC_CANONICAL_TARGET
-AM_INIT_AUTOMAKE([foreign])
+AM_INIT_AUTOMAKE([foreign no-dependencies])
AM_MAINTAINER_MODE
AC_CONFIG_HEADERS([config.h])
AC_CHECK_HEADERS(unistd.h sys/file.h stdlib.h sys/select.h)
AC_CONFIG_FILES([Makefile
+ doc/Makefile
src/Makefile])
AC_OUTPUT
+++ /dev/null
-#! /bin/sh
-# depcomp - compile a program generating dependencies as side-effects
-
-scriptversion=2009-04-28.21; # UTC
-
-# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009 Free
-# Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
-
-case $1 in
- '')
- echo "$0: No command. Try \`$0 --help' for more information." 1>&2
- exit 1;
- ;;
- -h | --h*)
- cat <<\EOF
-Usage: depcomp [--help] [--version] PROGRAM [ARGS]
-
-Run PROGRAMS ARGS to compile a file, generating dependencies
-as side-effects.
-
-Environment variables:
- depmode Dependency tracking mode.
- source Source file read by `PROGRAMS ARGS'.
- object Object file output by `PROGRAMS ARGS'.
- DEPDIR directory where to store dependencies.
- depfile Dependency file to output.
- tmpdepfile Temporary file to use when outputing dependencies.
- libtool Whether libtool is used (yes/no).
-
-Report bugs to <bug-automake@gnu.org>.
-EOF
- exit $?
- ;;
- -v | --v*)
- echo "depcomp $scriptversion"
- exit $?
- ;;
-esac
-
-if test -z "$depmode" || test -z "$source" || test -z "$object"; then
- echo "depcomp: Variables source, object and depmode must be set" 1>&2
- exit 1
-fi
-
-# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
-depfile=${depfile-`echo "$object" |
- sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
-tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
-
-rm -f "$tmpdepfile"
-
-# Some modes work just like other modes, but use different flags. We
-# parameterize here, but still list the modes in the big case below,
-# to make depend.m4 easier to write. Note that we *cannot* use a case
-# here, because this file can only contain one case statement.
-if test "$depmode" = hp; then
- # HP compiler uses -M and no extra arg.
- gccflag=-M
- depmode=gcc
-fi
-
-if test "$depmode" = dashXmstdout; then
- # This is just like dashmstdout with a different argument.
- dashmflag=-xM
- depmode=dashmstdout
-fi
-
-cygpath_u="cygpath -u -f -"
-if test "$depmode" = msvcmsys; then
- # This is just like msvisualcpp but w/o cygpath translation.
- # Just convert the backslash-escaped backslashes to single forward
- # slashes to satisfy depend.m4
- cygpath_u="sed s,\\\\\\\\,/,g"
- depmode=msvisualcpp
-fi
-
-case "$depmode" in
-gcc3)
-## gcc 3 implements dependency tracking that does exactly what
-## we want. Yay! Note: for some reason libtool 1.4 doesn't like
-## it if -MD -MP comes after the -MF stuff. Hmm.
-## Unfortunately, FreeBSD c89 acceptance of flags depends upon
-## the command line argument order; so add the flags where they
-## appear in depend2.am. Note that the slowdown incurred here
-## affects only configure: in makefiles, %FASTDEP% shortcuts this.
- for arg
- do
- case $arg in
- -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
- *) set fnord "$@" "$arg" ;;
- esac
- shift # fnord
- shift # $arg
- done
- "$@"
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
- mv "$tmpdepfile" "$depfile"
- ;;
-
-gcc)
-## There are various ways to get dependency output from gcc. Here's
-## why we pick this rather obscure method:
-## - Don't want to use -MD because we'd like the dependencies to end
-## up in a subdir. Having to rename by hand is ugly.
-## (We might end up doing this anyway to support other compilers.)
-## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
-## -MM, not -M (despite what the docs say).
-## - Using -M directly means running the compiler twice (even worse
-## than renaming).
- if test -z "$gccflag"; then
- gccflag=-MD,
- fi
- "$@" -Wp,"$gccflag$tmpdepfile"
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
-## The second -e expression handles DOS-style file names with drive letters.
- sed -e 's/^[^:]*: / /' \
- -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
-## This next piece of magic avoids the `deleted header file' problem.
-## The problem is that when a header file which appears in a .P file
-## is deleted, the dependency causes make to die (because there is
-## typically no way to rebuild the header). We avoid this by adding
-## dummy dependencies for each header file. Too bad gcc doesn't do
-## this for us directly.
- tr ' ' '
-' < "$tmpdepfile" |
-## Some versions of gcc put a space before the `:'. On the theory
-## that the space means something, we add a space to the output as
-## well.
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-hp)
- # This case exists only to let depend.m4 do its work. It works by
- # looking at the text of this script. This case will never be run,
- # since it is checked for above.
- exit 1
- ;;
-
-sgi)
- if test "$libtool" = yes; then
- "$@" "-Wp,-MDupdate,$tmpdepfile"
- else
- "$@" -MDupdate "$tmpdepfile"
- fi
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
- rm -f "$depfile"
-
- if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
- echo "$object : \\" > "$depfile"
-
- # Clip off the initial element (the dependent). Don't try to be
- # clever and replace this with sed code, as IRIX sed won't handle
- # lines with more than a fixed number of characters (4096 in
- # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
- # the IRIX cc adds comments like `#:fec' to the end of the
- # dependency line.
- tr ' ' '
-' < "$tmpdepfile" \
- | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
- tr '
-' ' ' >> "$depfile"
- echo >> "$depfile"
-
- # The second pass generates a dummy entry for each header file.
- tr ' ' '
-' < "$tmpdepfile" \
- | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
- >> "$depfile"
- else
- # The sourcefile does not contain any dependencies, so just
- # store a dummy comment line, to avoid errors with the Makefile
- # "include basename.Plo" scheme.
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile"
- ;;
-
-aix)
- # The C for AIX Compiler uses -M and outputs the dependencies
- # in a .u file. In older versions, this file always lives in the
- # current directory. Also, the AIX compiler puts `$object:' at the
- # start of each line; $object doesn't have directory information.
- # Version 6 uses the directory in both cases.
- dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
- test "x$dir" = "x$object" && dir=
- base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
- if test "$libtool" = yes; then
- tmpdepfile1=$dir$base.u
- tmpdepfile2=$base.u
- tmpdepfile3=$dir.libs/$base.u
- "$@" -Wc,-M
- else
- tmpdepfile1=$dir$base.u
- tmpdepfile2=$dir$base.u
- tmpdepfile3=$dir$base.u
- "$@" -M
- fi
- stat=$?
-
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
- exit $stat
- fi
-
- for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
- do
- test -f "$tmpdepfile" && break
- done
- if test -f "$tmpdepfile"; then
- # Each line is of the form `foo.o: dependent.h'.
- # Do two passes, one to just change these to
- # `$object: dependent.h' and one to simply `dependent.h:'.
- sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
- # That's a tab and a space in the [].
- sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
- else
- # The sourcefile does not contain any dependencies, so just
- # store a dummy comment line, to avoid errors with the Makefile
- # "include basename.Plo" scheme.
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile"
- ;;
-
-icc)
- # Intel's C compiler understands `-MD -MF file'. However on
- # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
- # ICC 7.0 will fill foo.d with something like
- # foo.o: sub/foo.c
- # foo.o: sub/foo.h
- # which is wrong. We want:
- # sub/foo.o: sub/foo.c
- # sub/foo.o: sub/foo.h
- # sub/foo.c:
- # sub/foo.h:
- # ICC 7.1 will output
- # foo.o: sub/foo.c sub/foo.h
- # and will wrap long lines using \ :
- # foo.o: sub/foo.c ... \
- # sub/foo.h ... \
- # ...
-
- "$@" -MD -MF "$tmpdepfile"
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
- rm -f "$depfile"
- # Each line is of the form `foo.o: dependent.h',
- # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
- # Do two passes, one to just change these to
- # `$object: dependent.h' and one to simply `dependent.h:'.
- sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
- # Some versions of the HPUX 10.20 sed can't process this invocation
- # correctly. Breaking it into two sed invocations is a workaround.
- sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
- sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-hp2)
- # The "hp" stanza above does not work with aCC (C++) and HP's ia64
- # compilers, which have integrated preprocessors. The correct option
- # to use with these is +Maked; it writes dependencies to a file named
- # 'foo.d', which lands next to the object file, wherever that
- # happens to be.
- # Much of this is similar to the tru64 case; see comments there.
- dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
- test "x$dir" = "x$object" && dir=
- base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
- if test "$libtool" = yes; then
- tmpdepfile1=$dir$base.d
- tmpdepfile2=$dir.libs/$base.d
- "$@" -Wc,+Maked
- else
- tmpdepfile1=$dir$base.d
- tmpdepfile2=$dir$base.d
- "$@" +Maked
- fi
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile1" "$tmpdepfile2"
- exit $stat
- fi
-
- for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
- do
- test -f "$tmpdepfile" && break
- done
- if test -f "$tmpdepfile"; then
- sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
- # Add `dependent.h:' lines.
- sed -ne '2,${
- s/^ *//
- s/ \\*$//
- s/$/:/
- p
- }' "$tmpdepfile" >> "$depfile"
- else
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile" "$tmpdepfile2"
- ;;
-
-tru64)
- # The Tru64 compiler uses -MD to generate dependencies as a side
- # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
- # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
- # dependencies in `foo.d' instead, so we check for that too.
- # Subdirectories are respected.
- dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
- test "x$dir" = "x$object" && dir=
- base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-
- if test "$libtool" = yes; then
- # With Tru64 cc, shared objects can also be used to make a
- # static library. This mechanism is used in libtool 1.4 series to
- # handle both shared and static libraries in a single compilation.
- # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
- #
- # With libtool 1.5 this exception was removed, and libtool now
- # generates 2 separate objects for the 2 libraries. These two
- # compilations output dependencies in $dir.libs/$base.o.d and
- # in $dir$base.o.d. We have to check for both files, because
- # one of the two compilations can be disabled. We should prefer
- # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
- # automatically cleaned when .libs/ is deleted, while ignoring
- # the former would cause a distcleancheck panic.
- tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4
- tmpdepfile2=$dir$base.o.d # libtool 1.5
- tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5
- tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504
- "$@" -Wc,-MD
- else
- tmpdepfile1=$dir$base.o.d
- tmpdepfile2=$dir$base.d
- tmpdepfile3=$dir$base.d
- tmpdepfile4=$dir$base.d
- "$@" -MD
- fi
-
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
- exit $stat
- fi
-
- for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
- do
- test -f "$tmpdepfile" && break
- done
- if test -f "$tmpdepfile"; then
- sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
- # That's a tab and a space in the [].
- sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
- else
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile"
- ;;
-
-#nosideeffect)
- # This comment above is used by automake to tell side-effect
- # dependency tracking mechanisms from slower ones.
-
-dashmstdout)
- # Important note: in order to support this mode, a compiler *must*
- # always write the preprocessed file to stdout, regardless of -o.
- "$@" || exit $?
-
- # Remove the call to Libtool.
- if test "$libtool" = yes; then
- while test "X$1" != 'X--mode=compile'; do
- shift
- done
- shift
- fi
-
- # Remove `-o $object'.
- IFS=" "
- for arg
- do
- case $arg in
- -o)
- shift
- ;;
- $object)
- shift
- ;;
- *)
- set fnord "$@" "$arg"
- shift # fnord
- shift # $arg
- ;;
- esac
- done
-
- test -z "$dashmflag" && dashmflag=-M
- # Require at least two characters before searching for `:'
- # in the target name. This is to cope with DOS-style filenames:
- # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
- "$@" $dashmflag |
- sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile"
- rm -f "$depfile"
- cat < "$tmpdepfile" > "$depfile"
- tr ' ' '
-' < "$tmpdepfile" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-dashXmstdout)
- # This case only exists to satisfy depend.m4. It is never actually
- # run, as this mode is specially recognized in the preamble.
- exit 1
- ;;
-
-makedepend)
- "$@" || exit $?
- # Remove any Libtool call
- if test "$libtool" = yes; then
- while test "X$1" != 'X--mode=compile'; do
- shift
- done
- shift
- fi
- # X makedepend
- shift
- cleared=no eat=no
- for arg
- do
- case $cleared in
- no)
- set ""; shift
- cleared=yes ;;
- esac
- if test $eat = yes; then
- eat=no
- continue
- fi
- case "$arg" in
- -D*|-I*)
- set fnord "$@" "$arg"; shift ;;
- # Strip any option that makedepend may not understand. Remove
- # the object too, otherwise makedepend will parse it as a source file.
- -arch)
- eat=yes ;;
- -*|$object)
- ;;
- *)
- set fnord "$@" "$arg"; shift ;;
- esac
- done
- obj_suffix=`echo "$object" | sed 's/^.*\././'`
- touch "$tmpdepfile"
- ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
- rm -f "$depfile"
- cat < "$tmpdepfile" > "$depfile"
- sed '1,2d' "$tmpdepfile" | tr ' ' '
-' | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile" "$tmpdepfile".bak
- ;;
-
-cpp)
- # Important note: in order to support this mode, a compiler *must*
- # always write the preprocessed file to stdout.
- "$@" || exit $?
-
- # Remove the call to Libtool.
- if test "$libtool" = yes; then
- while test "X$1" != 'X--mode=compile'; do
- shift
- done
- shift
- fi
-
- # Remove `-o $object'.
- IFS=" "
- for arg
- do
- case $arg in
- -o)
- shift
- ;;
- $object)
- shift
- ;;
- *)
- set fnord "$@" "$arg"
- shift # fnord
- shift # $arg
- ;;
- esac
- done
-
- "$@" -E |
- sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
- -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
- sed '$ s: \\$::' > "$tmpdepfile"
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- cat < "$tmpdepfile" >> "$depfile"
- sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-msvisualcpp)
- # Important note: in order to support this mode, a compiler *must*
- # always write the preprocessed file to stdout.
- "$@" || exit $?
-
- # Remove the call to Libtool.
- if test "$libtool" = yes; then
- while test "X$1" != 'X--mode=compile'; do
- shift
- done
- shift
- fi
-
- IFS=" "
- for arg
- do
- case "$arg" in
- -o)
- shift
- ;;
- $object)
- shift
- ;;
- "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
- set fnord "$@"
- shift
- shift
- ;;
- *)
- set fnord "$@" "$arg"
- shift
- shift
- ;;
- esac
- done
- "$@" -E 2>/dev/null |
- sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"
- echo " " >> "$depfile"
- sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-msvcmsys)
- # This case exists only to let depend.m4 do its work. It works by
- # looking at the text of this script. This case will never be run,
- # since it is checked for above.
- exit 1
- ;;
-
-none)
- exec "$@"
- ;;
-
-*)
- echo "Unknown depmode $depmode" 1>&2
- exit 1
- ;;
-esac
-
-exit 0
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:
--- /dev/null
+man_MANS = fping.8
+EXTRA_DIST = $(man_MANS)
--- /dev/null
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
+# Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+target_triplet = @target@
+subdir = doc
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+depcomp =
+am__depfiles_maybe =
+SOURCES =
+DIST_SOURCES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+man8dir = $(mandir)/man8
+am__installdirs = "$(DESTDIR)$(man8dir)"
+NROFF = nroff
+MANS = $(man_MANS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+am__leading_dot = @am__leading_dot@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target = @target@
+target_alias = @target_alias@
+target_cpu = @target_cpu@
+target_os = @target_os@
+target_vendor = @target_vendor@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+man_MANS = fping.8
+EXTRA_DIST = $(man_MANS)
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign --ignore-deps doc/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign --ignore-deps doc/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+install-man8: $(man_MANS)
+ @$(NORMAL_INSTALL)
+ test -z "$(man8dir)" || $(MKDIR_P) "$(DESTDIR)$(man8dir)"
+ @list=''; test -n "$(man8dir)" || exit 0; \
+ { for i in $$list; do echo "$$i"; done; \
+ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+ sed -n '/\.8[a-z]*$$/p'; \
+ } | while read p; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; echo "$$p"; \
+ done | \
+ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+ sed 'N;N;s,\n, ,g' | { \
+ list=; while read file base inst; do \
+ if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
+ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
+ fi; \
+ done; \
+ for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+ while read files; do \
+ test -z "$$files" || { \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
+ done; }
+
+uninstall-man8:
+ @$(NORMAL_UNINSTALL)
+ @list=''; test -n "$(man8dir)" || exit 0; \
+ files=`{ for i in $$list; do echo "$$i"; done; \
+ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+ sed -n '/\.8[a-z]*$$/p'; \
+ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+ test -z "$$files" || { \
+ echo " ( cd '$(DESTDIR)$(man8dir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(man8dir)" && rm -f $$files; }
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+
+distdir: $(DISTFILES)
+ @list='$(MANS)'; if test -n "$$list"; then \
+ list=`for p in $$list; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
+ if test -n "$$list" && \
+ grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
+ echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
+ grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
+ echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
+ echo " typically \`make maintainer-clean' will remove them" >&2; \
+ exit 1; \
+ else :; fi; \
+ else :; fi
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile $(MANS)
+installdirs:
+ for dir in "$(DESTDIR)$(man8dir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic mostlyclean-am
+
+distclean: distclean-am
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-man
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man: install-man8
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-man
+
+uninstall-man: uninstall-man8
+
+.MAKE: install-am install-strip
+
+.PHONY: all all-am check check-am clean clean-generic distclean \
+ distclean-generic distdir dvi dvi-am html html-am info info-am \
+ install install-am install-data install-data-am install-dvi \
+ install-dvi-am install-exec install-exec-am install-html \
+ install-html-am install-info install-info-am install-man \
+ install-man8 install-pdf install-pdf-am install-ps \
+ install-ps-am install-strip installcheck installcheck-am \
+ installdirs maintainer-clean maintainer-clean-generic \
+ mostlyclean mostlyclean-generic pdf pdf-am ps ps-am uninstall \
+ uninstall-am uninstall-man uninstall-man8
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
fping_OBJECTS = $(am_fping_OBJECTS)
fping_LDADD = $(LDADD)
DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
+depcomp =
+am__depfiles_maybe =
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
-CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
-DEPDIR = @DEPDIR@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
exit 1;; \
esac; \
done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/Makefile'; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign --ignore-deps src/Makefile'; \
$(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --foreign src/Makefile
+ $(AUTOMAKE) --foreign --ignore-deps src/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
distclean-compile:
-rm -f *.tab.c
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fping.Po@am__quote@
-
.c.o:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c $<
+ $(COMPILE) -c $<
.c.obj:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
+ $(COMPILE) -c `$(CYGPATH_W) '$<'`
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
clean-am: clean-generic clean-sbinPROGRAMS mostlyclean-am
distclean: distclean-am
- -rm -rf ./$(DEPDIR)
-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
distclean-tags
installcheck-am:
maintainer-clean: maintainer-clean-am
- -rm -rf ./$(DEPDIR)
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
--- /dev/null
+gcc -DHAVE_CONFIG_H -D_BSD_SOURCE -D_POSIX_SOURCE -I.. -Wall -std=c89 -pedantic -c -o fping.o fping.c
+++ /dev/null
-gcc -DHAVE_CONFIG_H -D_BSD_SOURCE -D_POSIX_SOURCE -I. -Wall -std=c89 -pedantic -c -o fping.o fping.c
projects / fping.git / commitdiff